- 瑞士Trimos测高仪│Trimos测长机
- Hexagon影像仪│海克斯康三坐标
- 苏州Mitutoyo日本三丰量具
- Fischer菲希尔涂层测厚仪
- Elcometer易高涂层测厚仪
- GE超声波探伤仪
- 奥林巴斯超声波探伤仪
- GBIS超声波探头
- Bruker布鲁克光谱仪
- 赛普斯SCIAPS光谱仪
- Western Instrument仪器
- G.A.L. Gage焊接量规
- Clark硬度计│Sun-Tec
- 日本future-tech硬度计
- King便携式布氏硬度计
- Rex Gauge邵氏硬度计
- Ames便携式洛氏硬度计
- Hemco Gage螺纹规
- PMC Lone Star石油量规
- Vermont螺纹规│VTG螺纹规
- GageAssembly螺纹规
- Threadmaster进口螺纹规
- WESTport Corporation
- Threadcheck螺纹规│三线规
- Mueller Gage沟槽量仪
- Kroeplin精密卡规
- 美国环球Universal Punch
- 德国Schwenk进口内径量仪
- Allen Gauge and Tool
- Fowler High Precision
- Swiss Precision Instruments
- Flexbar Machine Corporation
- Acem螺纹规│Stub Acme螺纹规
- 苏州工量具│测量仪器
- Wrentham Tool Group
- Meyer Gage针规、梅尔量规
- ASKER橡胶硬度计
- NAKANISHI高速主轴
- OJIYAS螺纹规│OJIYAS气动量仪
- Microset 复制胶
- DeFelsko涂层测厚仪
- OSG丝锥│OSG螺纹规
- Western Gage 气动量仪检具
- Michigan Spline Gage Co
- Southwest Calibration Service
- McCord and Company
- Pennoyer-Dodge Company
- Pi Tape Texas, LLC
- BARCOR INC.
- Advanced Systems and Designs
- Calmetrics Inc
- 美国GSG美标管螺纹量规
- 美国GSG石油螺纹规│GSG牙形板
- 美国GSG美标ASME螺纹规
- Glastonbury Southern Gage
- 美国GSG螺纹指示规│螺纹量仪
- 美国GSG倒角量规│锪孔量规
|
数显指示规
航空内螺纹中径测量仪
美国GSG内螺纹测量中心
美国进口GSG航空螺纹规
Variable Thread Gages
SYSTEM 21
System 21 provides for interchangeable
assembly with respect to functional size only. Functional size must be measured
at the maximum material limit within the length of standard gaging elements.
The characteristic known as NO GO functional diameter must also be verified.
This can be accomplished by using fixed limit gaging or variable gaging with
functional elements.
SYSTEM 21A (FOR METRIC THREADS IN
ACCORDANCE WITH ANSI B1.18M)
System 21A provides for interchangeable
assembly with functional size verified at the maximum material limit using
standard length gaging elements. This can be accomplished using fixed limit
gaging or variable gaging with functional elements. System 21A also states that
the minimum material limit (minimum pitch diameter) must be verified by
inspecting two thread flank locations over the length of the thread. This can
be accomplished by using variable gaging or thread roll snap gages with pitch
diameter elements.
SYSTEM 22
System 22 provides for the interchangeable
assembly with functional size verified at the maximum material limit using
standard length gaging elements. This can be accomplished using fixed limit
gaging or variable gaging with functional diameter elements. System 22 also
states that the minimum material limit (minimum pitch diameter) must be
verified over the full length of the thread. This can be accomplished using
variable gaging with pitch diameter elements.
SYSTEM 23
System 23 provides for interchangeable assembly
with functional size verified at the maximum material limit using standard
length gaging elements and minimum material limit (minimum pitch diameter) must
be verified over the full length of the thread. The gaging requirements for
SYSTEM 22 would also apply here but in SYSTEM 23 other thread characteristics
such as lead, flank angles, taper and roundness must have to be independently
verified. Only thread characteristics, which are specified, will have to be
inspected for SYSTEM 23 compliance.
TC & ITC Comparators
Precision
Ball slide construction and constant gaging
pressure assure precise reading through linear travel of the ball slide.
Definitive
Helical path seating and 60% peripheral
contact provide functional size position within the pitch diameter tolerance
assigned.
Gaging Range
Single frame covers a size range of #10
through 3/4".
Versatile
Segments are easily changed with positive
mounting pin alignment.
Economical
Reduced gaging time compared to Go/NoGo
gages .
ITC Comparator
Precision
Rigid construction and constant gaging
pressure assure precise readings.
Definitive
The ITC gage reads the actual size of the
pitch diameter showing its position in relation to the pitch diameter tolerance
assigned.
Gaging Range
Single frame covers a size range of #10
through 2 1/2" , Larger frames are available up to 8"
Versatile
The positive alignment feature of the frame
allows segments to be easily changed with positive mounting pin alignment.
Economical
Reduced gaging time compared to Go/NoGo gages.
苏州斯托茨机电设备有限公司专业从事螺纹检测,代理销售各类螺纹中径量仪、螺纹单项仪、螺纹参数检测、螺纹通止规,代理美国GSG单项参数测量仪、美国GSG螺纹规,期待您的咨询。
GSG全称是Glastonbury Southern Gage,是美国最大的非标量规、工装家具制造商,可以生产各类标准件、CLASS:XXX级的光面环塞规、UNJ航空螺纹量规、MJ米制航空量规、API石油螺纹量规、HBPV螺纹塞规/BPV螺纹环规、Sharp Vee螺纹规、TBG/UPTBG螺纹规、NC螺纹规、REG螺纹规、IF螺纹规、FH螺纹规等,美标AGD可调式螺纹环规、ANPT螺纹规、NPTF螺纹规、PTF SAE Short螺纹规、GSG螺纹指示规、GSG螺纹中径量仪。
苏州斯托茨机电设备有限公司是一家专业从事测量设备、工装治具销售的企业,销售美国GSG螺纹量规、美国GSG光面量规、美国GSG石油螺纹规。同时销售HEMCO GAGE螺纹规、PMC石油螺纹量规、Gagemaker石油螺纹单项参数检测规、美国Rex Gauge邵氏硬度计、美国Flexbar 16130印模胶泥、法国Plastiform M70/M60/M90打样膏、德国JBO螺纹规、德国马尔粗糙度仪、日本三丰Mitutoyo数显卡尺、INSIZE英士数显深度尺、国产PD-6001内螺纹中径测量仪、PD-6000/PD-8001/PD-8002单项参数测量仪、GALGAGE焊接量规、Threadmaster螺纹规、Allen gauge单项仪、Meyer梅尔针规套装、Western Gage气动量仪、Marposs气动量仪E4N电子柱、Pennoyer-Dodge螺纹规、Barcor Inc倒角规、Sun-tec硬度计、Trimos测长机、影像仪、King硬度计、Cameron ball Gage密封槽球规、Asker橡胶硬度计、威尔逊硬度块、David Ellis硬度块、King硬度块、国产钻石硬度块等。更多产品 比如:CWT® GFM™, Gas Flow Monitor 气体流量计、Mueller Gage、Universal Punch跳动量仪、国产跳动量仪、期待您的咨询。
Trimos测高仪│PMC螺纹规│Kroeplin卡规│日本三丰Mitutoyo│INSIZE英仕