BA and G Series Thread Gauges

BA Series

Gauges for testing threads having a full form BA profile are manufactured to BS 93: 2008 and BS 919: Part 2: 2007.

BS 93 specifies basic information for the British Association thread form, and tabulates diameters for threads from 0BA to 25BA. However, 10BA is generally the smallest size manufactured as stock items. (Smaller sizes may be quoted for on application.)

• Basic Form BA Thread
• H = 1.136 34 x p
• h = 0.600 00 x p
• r = 0.180 83 x p
• s = 0.268 17 x p

External threads from 0BA to 10BA are provided with an allowance of 0.001” on diameter to allow for easy assembly with the internal thread.

Provision is made for two classes of fit for external threads; Close and Normal for sizes from 0BA to 10BA inclusive and, for Normal class, only for sizes from 11BA to 16BA. Close class is intended for precision parts where there is controlled accuracy of form and pitch. Normal class is intended for general commercial use.

There is only one class of fit for internal threads, which is not designated.

BS 919: Pt 2: 2007 specifies the limits for gauges and are similar in style to those used for Whitworth threads.

G Series

Gauges for testing threads to ISO228:2003 (G Series).

ISO228 specifies details of pipe threads where pressure tight joints are not required and also specifies the limits for gauges for testing the product thread.

ISO 228/1 - 2003 for the designation, dimensions and tolerances of the product thread and to ISO 228/2 – 2003, for verification by means of limit gauges.

The standard specifies basic information for Whitworth form fastening pipe threads and tabulates diameters having a thread size designation in the range1/16 to 6 inclusive.

There is no allowance provided for external or internal threads.

Provision is made for two classes of fit for external threads: Class A and Class B, and one class only for the internal thread, which is not designated. The external class A tolerance is equivalent to the internal thread tolerance. The class B tolerance is twice that of the class A tolerance.

The specification states that, where no class is specified, class B should be assumed.

Internal and external threads are designated by the letter G followed by the thread size designation. This designation refers to the pipe size and not to the thread diameter.

The gauge limits and principles are similar to the limits specified in ISO 1502.

苏州斯托茨机电设备有限公司是一家专业从事测量设备、工装治具销售的企业，销售美国GSG螺纹量规、美国GSG光面量规、美国GSG石油螺纹规。同时销售HEMCO GAGE螺纹规、PMC石油螺纹量规、Gagemaker石油螺纹单项参数检测规、美国Rex Gauge邵氏硬度计、美国Flexbar 16130印模胶泥、法国Plastiform M70/M60/M90打样膏、德国JBO螺纹规、德国马尔粗糙度仪、日本三丰Mitutoyo数显卡尺、INSIZE英士数显深度尺、国产PD-6001内螺纹中径测量仪、PD-6000/PD-8001/PD-8002单项参数测量仪、GALGAGE焊接量规、Threadmaster螺纹规、Allen gauge单项仪、Meyer梅尔针规套装、Western Gage气动量仪、Marposs气动量仪E4N电子柱、Pennoyer-Dodge螺纹规、Barcor Inc倒角规、Sun-tec硬度计、Trimos测长机、影像仪、King硬度计、Cameron ball Gage密封槽球规、Asker橡胶硬度计、威尔逊硬度块、David Ellis硬度块、King硬度块、国产钻石硬度块等。更多产品 比如：CWT® GFM™, Gas Flow Monitor 气体流量计、Mueller Gage、Universal Punch跳动量仪、国产跳动量仪、期待您的咨询。