- 国产斯托茨非标定制螺纹规
- GSG石油螺纹规│API量规
- GSG美制螺纹规│美标螺纹规
- GSG美国精密量规│进口量仪
- GSG螺纹指示规│螺纹量仪
- GSG美国倒角量规│锪孔量规
- GSG美国进口管螺纹量规
- API 5B石油管线管LP螺纹规
- API 5B石油套管短圆CSG螺纹规
- API 5B偏梯扣油管BCSG螺纹规
- API 5B油管TBG│UPTBG螺纹规
- API 7-2 数字型NC螺纹量规
- API 7-2 正规型REG螺纹量规
- API 7-2 贯眼型FH螺纹量规
- API 7-2 内平型IF螺纹量规
- Sharp Vee螺纹规(VR塞规)
- 背压阀HBPV螺纹规BPV塞规
- 海克斯康(Hexagon)测量仪器
- 苏州甪直三丰Mitutoyo量具
- 昆山德国Fischer菲希尔仪器
- 张家港英国易高Elcometer
- 江阴美国GE超声波探伤仪
- 无锡奥林巴斯超声波探伤仪
- 吴江英国GBIS超声波探头
- 太仓Spectronics无损检测
- 常熟Bruker布鲁克光谱仪
- 美国赛普斯SCIAPS光谱仪
- 镇江美国磁通Magnaflux
- Western Instrument仪器
- 嘉兴南通友联无损检测仪器
- 绍兴G.A.L. Gage焊接量规
- 宁波瑞士Maurer Magnetic
- 苏州标样│无损探伤试块
- 盐城建湖BAQ GmbH硬度计
- SIC MARKING西刻打标机
- Clark硬度计│Sun-Tec
- 日本future-tech硬度计
- 美国King便携式布氏硬度计
- 美国Rex Gauge邵氏硬度计
- 进口Ames便携式洛氏硬度计
- 美国Hemco螺纹规中国总代理
- PMC Lone Star石油量规
- Vermont螺纹规│VTG螺纹规
- GageAssembly螺纹规代理商
- Threadmaster进口螺纹规
- Westport螺纹规│硬度块
- Threadcheck螺纹规│三线规
- 美国Mueller Gage沟槽量仪
- 德国Kroeplin内外径卡规
- 美国环球Universal Punch
- 东莞DULIANG光学检测仪器
- 德国Schwenk进口内径量仪
- 宝石石油量规│API石油规
- 美国Allen Gauge单项仪
- Fowler 测量仪器│福勒量具
- 美国SPI通用测量量具
- Micro-Vu影像测量仪
- 苏州测量仪器MRO一站式供应商
![]() |
美标MJ系列航空螺纹
进口航空螺纹量规
美国进口螺纹规
GSG航空螺纹规
产地:美国
货期:6-8周
UNJ, UNJC, UNJF and UNJEF threads are almost identical to UN, UNC, UNF, and UNEF threads except that the external J thread has a much larger root radius than the standard UN threads and inspection must be performed on this element. The Special UNJ threads are designated by the nomenclature UNJS. J screw threads feature a root radius which improves the tensile stress area of the fastener and helps to reduce the stress concentration factor in the thread thus making the thread stronger. Additionally, the requirement for high strength is achieved with 3A and 3B classes of fit. All pitch diameters and tolerances are based on the Unified Inch Standard.
MIL-S-8879, UNJ Screw Thread Producers and Users. 1. CANCELLATION NOTICE: Effective 24 February 2003 with Notice 3. MIL-S-8879C, dated 25 July 1991, and AMENDMENT 1, dated 2 September 1992, are Hereby cancelled, and superceded by the Society of Automotive Engineers (SAE) Aerospace
SAE AS8879 was introduced to provide an alternative to the inactive government specification Mil-S-8879 for screw threads – UNJ profile, inches.
Per SAE AS8879, UNJ Thread profiles are not interchangeable with Metric system MJ profiles or UN profile inch screws. The internal UNJ thread will assemble with the standard UN external thread however assembling external UNJ threads with UN series internal threads should be avoided due to potential interference at the minor diameter.
External threads are of Unified form per ASME B1.1 and modified at the root so that the flanks of the adjacent threads are joined by one continuous, smooth and blended curve tangent to the flanks. The radius is specified in the applicable standard.
Internal threads are also of Unified form per ASME B.1. and modified at the minor diameter to the values specified in the applicable standard.
Standard working Go/No Go thread plug gages are used to inspect internal J threads. The gage is typically marked without any modifications to the Plugs.
For external J threads, the Go member is modified to clear the minor diameter. A standard No Go thread ring gage may be used to inspect J threads. Both gages are typically marked accordingly.
苏州斯托茨机电设备有限公司可以提供全系列GSG航空螺纹量规,货期短,质量稳定可靠,期待您的咨询。